Tags: ntp

Sort by: Date / Title /

  1. 3 years ago by sox and saved by 1 other
    1. date -s "$(ssh user@server date -R)"
    Paste this in your website: <script type="text/javascript" src="http://www.posteet.com/embed/2175"></script>
  2. 3 years ago by sox
    service ntp stop
    ntpd -gq -c /etc/ntp.conf
    service ntp start
    Paste this in your website: <script type="text/javascript" src="http://www.posteet.com/embed/2174"></script>
  3. 4 years ago by spirit and saved by 1 other
    1. dateset="$(sshuser@server date)"
    Paste this in your website: <script type="text/javascript" src="http://www.posteet.com/embed/2169"></script>
  4. sponsorised links
  5. 4 years ago by spirit
    > According to www.ntp.org in stanard Linux o.s. (adjtime(2) - http://www.ntp.org/ntpfaq/NTP-s-algo.htm#S-ALGO-BASIC) time adjusting has rate of 0.5ms per second
    
    That's the _maximum_ slew rate. The actual slew rate depends on a number f factors.
    
    > to slew time but because do you speak about "maximum" rate of 0.5 ms/sec. ?
    
    The maximum slew rate is 500ppm; this is the equivalent of half a millisecond per second or 43 seconds per day.
    
    > Does ntpd use always the same 0.5 as value or it's a variable parameter ?
    
    500ppm is the _maximum_ slew rate that most kernels can tolerate. The actual slew rate depends on a number of factors.
    
    > I'm confused because "Rob MacGregor" said about step method (128ms < offset < 1000s) :
    
    1000 seconds == the default panic threshold. ntpd will abort when it sees an offset greater than the panic threshold
    
    128ms == the default step/slew threshold. ntpd will slew offsets below this threhold and will step offsets above this threshold
    
    >Stepping: Time changes in large units, quickly With "Step" method (settimeofday), time is gradually changed with higher rate or time is changes immediately to correct time.
    
    step == reset the clock to the correct time in _one_ instantaneous step.
    
    A stepped clock can "move backwards".
    
    slew == adjust the clock by speeding it up or slowing it down. A slewed clock never "moves backwards"
    
    > example for use step method : my local clock is 5:00 pm and real time is 5:05 pm, Ntpd set immediately local clock to 5:05 pm or it corrects time gradually ?
    
    Slewing the clock to correct a 5 minute offset will take 6.97 days at the maximum 500ppm slew rate.
    
    5 minutes is greater than the default 128ms step/slew threshold. In this case ntpd will _step_ the clock.
    Paste this in your website: <script type="text/javascript" src="http://www.posteet.com/embed/2164"></script>

First / Previous / Next / Last / Page 1 of 1 (4 posteets)